T38 top hammer thread drill bits
Related products
GL250 Rock drill
Bore:79.4mm
Stroke:73.25mm
Air Consumption:3.7M³/5bar
Blows/MinuteBar:2050/5
Applied range:The GL250 rock drill is mainly used in either rock drilling work such as mining and tun-neling, or in railway, water conservancy construction projects and stone work. It is suitable for wet drilling on hard medium hard rock, or for drilling horizontal or inclined blast holes.
GLR5 Multifunctional Solar Pile Driver Machine
- Drilling depth:3500mm
- Ground screw piling depth:3500mm
- Drilling diameter (auger drilling):0-300mm
- Diesel engine power:53kw
Applied range:It is suitable for driving piles in solar photovoltaic power plants, bridge foundations, building foundations, road foundation reinforcement, high-speed railway power facilities, wind power plants, soft soil treatment, etc.
KG520/KG520H Down The Hole Drill Rig For Open Use
R thread Self Drilling Anchor Bars
- Size:R32S-15
- Ultimate Load:360KN
- Yield Load:280KN
- Weight: 4.1kg/meter
Applied range:The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc jobs, which is widely used in mining, tunneling, railway, metro construction etc projects.
G2Z Fully Hydraulic Two-Boom tunnel jumbo drill
Drilling diameter: φ38mm-φ102mm
Drilling depth: 5268mm
Telescopic length of working arm: 1600mm
Total motor power: 161.5kW
Applied range:It is used for drilling and blasting drilling operations or bolt hole operations in large and medium-sized tunnels such as railways, highways, national defense, water conservancy, mining and other large and medium-sized tunnels.
Reviews
There are no reviews yet.