Parameter
| Part Name | project | parameter |
| Whole machine | Dimensions (L*W*H) | 5620x2045x1950mm |
| Total Weight | 4t | |
| Applicable rock | f=6~20 | |
| Drilling diameter | 90~130mm | |
| Drilling vertical hole depth | 25m | |
| Drilling horizontal hole depth | 30m | |
| Drill boom | Drill boom pitch angle | 70°up and down |
| Boom swing angle | 30°left and 30°right | |
| Pitch angle of carriage | 100°Up and down | |
| Swing angle of carriage | Left 30°Right 30° (Special working conditions 90°) |
|
| Maximum lifting force | 18KN | |
| One-time advancing trip | 3000mm | |
| Propeller compensation length | 1200mm | |
| Maximum height of drilling horizontal hole | 3500mm | |
| Working air pressure (when equipped with impactor) |
0.7~1.6Mpa | |
| Air consumption (when equipped with impactor) |
7~12m³/min | |
| Impact frequency | 950~1500 times/min | |
| Rotating speed | 0~70r/min | |
| Rotation torque | 1500N.m | |
| monitor rate | 33kw | |
| Chassis | Walking speed | 2.5km/h |
| Stand-alone climbing ability | 25° | |
| Height of chassis from ground | 300mm |
Reviews
There are no reviews yet.